КАТЕГОРИИ |
Verity Systems DATAGONE Degausserпо запросу
Доступен под заказ
Артикул: DATAGONE Degausser
Производитель: Verity Systems ОПИСАНИЕ И ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ
Fully Automatic Degausser to Securely Erase Hard Drives and Backup Tapes Including DLT, LTO, 8mm and more The DATAGONE is a fully automatic degausser for Hard Drives and Backup tapes. It uses pulse discharge technology and is fully processor controlled which enables the DATAGONE to offer a complete and secure erase on magnetic media. Media that can be degaussed includes Hard Drives that use both perpendicular and vertical recording techniques and most common backup tapes including DLT, LTO, 8mm, DDS and more. Operation When the degauss cycle is complete, the hard drive is released and exits from the degausser on the right hand side. Throughout the entire degauss cycle the onboard processor monitors the procedure and progress messages are displayed on the LCD panel. If the degauss cycle is interrupted for any reason such as power loss or any fault condition, the media is retained in the DATAGONE and the operator is immediately alerted to the interruption in the erasure cycle on the LCD panel. To eject media when the cycle has failed for any reason the operator has to press the reset button. This releases the Hard Drive or Tape and resets the degauss cycle. The operator should then attempt a repeat erasure. The entire erasure process takes approximately 8 seconds. Who Recommends Hard Drive Degaussing? Note: After degaussing, hard drives should not be not be reused as they are stressed in the erasure process. The DATAGONE is manufactured by VS Security Products.
|